QUILOSA SINTESEL WALNUT

Water-based sealant in walnut colour for joints in wood, whether varnished, lacquered or natural. Solvent-free, odourless and easy to apply and smooth.

  • Excellent adhesion to wood, plaster, cement, brick, plasterboard, aluminium, PVC, ceramic and glass
  • Can be painted and varnished
  • Forms a skin quickly, leaves no tack and does not blacken
  • Applied from +5°C to +50°C, stays flexible from -10°C to +80°C
  • Easy to remove with water while fresh
  • CE marked (EN 15651-1 F-INT), A+ very low emissions
SKU: 100191
BARCODE: 8411729121792
12 PCS/BOX

Applications

For sealing joints between pieces of wood (parquet, skirting boards, cabinets) and between wood and the building (doors, windows).

Instructions for use

Surfaces must be firm, dry and free of dust, grease and old sealant. In deep joints use a backing bead to control the depth. Cut the tip, screw on the nozzle, cut it to the required opening and place the cartridge in a gun. Fill the joint and smooth it with a flat spatula. The sealant reaches its final colour once cured. Protect from rain for 2-5 hours after application. Clean tools with water while the product is fresh. Do not apply below 5°C or in rain. Not for joints with movement over 10%, joints under water, or on iron, copper, brass or unprotected metals. When painting, use an elastic paint and test compatibility first.

Technical Data

Base: water-based synthetic | Density: 1.05 g/cm³ | Shore A hardness: 50 | Elongation at break: 500-600% | Movement capacity: 10% | Temperature resistance: -20°C to +80°C | Application temperature: 5-50°C | UV and weather resistant